|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alphacool NexXxoS NB-SLI 1 Northbridge **CLEARANCE**
Ref: 727
New Northbridge copper cooler for NForce 4-Chipsets, for ex. DFI LanParty, Abit Fatal1ty and AN8-Series, MSI K8N nF4 Series (Neo4 Diamond), based on Alphacool NexXxoS Cooler-Series, with vertical channels in the PCF(c) method of construction for efficient heat transfer. The cross channels are glass beaded, in order to increase the surface spread of heat build-up. This also enables a stable performance at extreme summer temperatures, high Overclocking-Potential and Low Noise. This cooler is conceived for the highest requirements. The bearing area of the cooler is completely flat and polished. The sealing between Plexiglas and the copper cooling elements succeeds by means of a durable O-ring.
The mounting is enabled via the installation drill holes which are standard with all AMD mainboards, with bolts and springs. The mounting parts are made of stainless steel. For the mounting the mainboard must be correspondingly removed. The G1/4" connections are conceived for all connecting systems.
» More Info...
(Opens in New Window)
Price:
£8.00 exc VAT
(£9.40 Including VAT at 17.5%)
OUT OF STOCK
|
|
|
Alphacool NexXxoS XP (Socket 755) **CLEARANCE**
Ref: 318
New copper cooler with vertical channels in the PCF(c) method of construction, additionally the channels were milled in 90°angle, for an efficient heat transfer. The copper surface has been glass beaded, in order to increase the cooling surface. The cooler possesses a patented nozzle device with return channels for accelerated warm water transfer. The flow resistance has been reduced up to 30%, perfect for systems with G1/4" connections and 10mm hoses, as the cooler incorporates hose cross-sections.
In order to use the advantage of a complete metal cooler to full capacity, high-temperature o-seal rings were introduced, which can survive maximal temperatures of up to 200°Celsius - a further safety factor, in the event of fault.
Further mechanical advantages result from central surface pressure of the middle bolt and the trouble-free installation, with no need of removing the mainboard.
The bearing area of this cooler is flat and polished. The cover is polished, cover and nozzle device are nickel-plated. The G1/4" (BSPT 1/4") screw threads are adapted for all connecting systems. Due to the enclosed mounting, there is no need to remove your mainboard.
» More Info...
(Opens in New Window)
Price:
£11.00 exc VAT
(£12.93 Including VAT at 17.5%)
|
|
|
|
|
|
RepackCooling Slot-In rev. 2 5.25" **CLEARANCE**
Ref: 645
This water supply tank "Slot-In" was designed for computer water cooling systems. It disposes of simple mounting, handling and cool optics. It only has to be put into an empty 5 1/4 slot and READY! No drilling or sawing necessary!
By using the Slot-In, the enclosed air in the cooling system can automatically be released. The tank is to be closed with a plug, thus you’ll have a closed system. No water can evaporate and thus annoying refilling can be dispensed with.
The UV LED is equipped with a resistor and thus can be connected directly to 12 volts. Thanks to the bright UV LED, the pump function and the water level can be better controlled. The tank has 4x 5mm LED drillings, at which 2x UV LEDs are included in delivery.
Requires 2x 1/4" BSP (G1/4) fittings to match your desired hose type. NOT INCLUDED
» Click Here for More Info
(Opens in New Window)
Price:
£19.00 exc VAT
(£22.33 Including VAT at 17.5%)
OUT OF STOCK
|
|
|
|
|
|
DangerDen RBX (1/2") - P4 478 **CLEARANCE**
Ref: 626
Includes -
- Complete Block Assembled with Top and O-ring,
and #1 Accelerator Plate.
- Ships with 1/2" Fittings
- "Y" Fitting
- Stainless Steel Hold Down Kit
- AMD Block ships with 4 additional anti-crush pads.
- Machined Lapped and Touched up to 1200 grit
- Pressure tested before shipment to 85psi
For reviews of this item see HERE
» Manufacturer's Info
(Opens in New Window)
Price:
£19.00 exc VAT
(£22.33 Including VAT at 17.5%)
OUT OF STOCK
|
|
|
|
|
|
|
|
|
|
|
|
DangerDen X18 GPU Block (1/2") **CLEARANCE**
Ref: 618
The X18 is designed to provide maximum cooling for the ATI X1800 series allowing significant overclocks
New Features :
- Uses the Additional RAM Pad mounting points for maximum mounting contact
Includes:
- Complete Block Assembled with Top and Gaskets
- High Flow 1/2" or 3/8" OD Fittings
- Just one Inlet and Outlet for complete cooling
- Low flow restriction low pressure drop
- Stainless Steel Hold Downs
- Hand Lapped
- Pressure tested before shipment
Includes - Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
Please leak test 24hrs upon receipt. Verify secure mount 48hrs after installation.
» Manufacturer's Spec
(Opens in New Window)
Price:
£35.00 exc VAT
(£41.13 Including VAT at 17.5%)
Choose Barb Size
|
|
|
|
|
|
|
|
|
|
|
Clearance Items
