EK Waterblocks

EK FC8800GTX with Reg Cooler - SLI Prep'd, Acetal Top
Ref: 63

High performance VGA water block for GeForce 8800 GTX series graphic cards. Base is made of electrolytic copper. Top is made of quality POM Acetal. The sealing is preformed by quality rubber washer. Aluminium part is made for cooling the mosfets of 8800 GTX series. Block is mounted with enclosed M2 and M2,5 screws.
Fittings are included in price!

Prepared for SLI means, that fittings can be used on both side of the block (up and down)!

» Installation Guide
(Opens in New Window)

Price: £46.46 exc VAT
(£54.59 Including VAT at 17.5%)

EK NF4 Rev 1.1 Chipset Cooler - Acetal Top **REDUCED TO CLEAR**
Ref: 78

High performance low restriction Water block EK-NF4 rev 1.1 was made just for motherboard with nForce 4 chipset for manufacturers such as: DFI, ASUS, MSI. The position of Northbridge demands the unique form of water block. Therefore the block does not interferes the setting of graphic card in any PCIe slot. It has small water restriction, and it has better performance any Northbridge needs.

The fitting barbs and fitting mechanism are included in price.

» Installation Manual
(Opens in New Window)

Price: £17.00 exc VAT
(£19.98 Including VAT at 17.5%)

EK NB EVGA 680i
Ref: 113

High performance low restriction Water block EK-NB EVGA 680i - Acetal was made just for EVGA 680i Northbridge motherboard. It has small water restriction, and it has better performance any Northbridge needs.

Water clocks base is made of electrolytic coper, and top is made of quality POM Acetal material. Base is extremely flat and polished to mirror finish. The fitting barbs and fitting mechanism are included in price.

Price: £19.05 exc VAT
(£22.38 Including VAT at 17.5%)

EK NB4 Intel Rev 1.1 Chipset Cooler - Acetal Top **REDUCED TO CLEAR**
Ref: 757

High performance low restriction Water block EK-NB4 i was made just for motherboards with hook mounting for all manufacturers such as: DFI, ASUS, MSI, Abit, Gigabyte... It is developed for high water flow, and it has better performance any Northbridge needs.

The fitting barbs and fitting mechanism are included in price.

» Installation Manual
(Opens in New Window)

Price: £17.00 exc VAT
(£19.98 Including VAT at 17.5%)

EK NB/SB ASUS1
Ref: 153

EK-NB/SB ASUS 1 Chipset block for most LGA 775 ASUS motherboards. Block can be mounted on NB and SB chipset.

Price: £19.05 exc VAT
(£22.38 Including VAT at 17.5%)

EK NB/SB ASUS2
Ref: 157

EK-NB/SB ASUS 2 Chipset block for most LGA 775 ASUS motherboards. Block can be mounted on NB and SB chipset but is recommended to use on Chipset close to CPU.

Price: £19.05 exc VAT
(£22.38 Including VAT at 17.5%)

EK Mosfet 680i
Ref: 500

Water Block for EVGA 680i Mosfets...

Supported motherboards:

• BFG nForce 680i SLI
• BFG nForce 680i LT SLI
• EVGA nForce 680i SLI A1
• EVGA nForce 680i SLI T1
• EVGA nForce 680i LT SLI A1
• EVGA nForce 680i LT SLI T1
• MSI P6N nForce 680i SLI
• XFX 680i SLI nForce 680i SLI
• XFX 680i LT nForce 680i LT

EK Mosfet Asus1
Ref: 501

Mosfet water block for the following ASUS LGA 775 motherboards:

• Commando 1
• Striker Extreme 2
• Striker 2
• p5b deluxe 2
• P5N32-SLI 2

EK Mosfet Asus2
Ref: 505

The Asus 2 Mosfet Waterblock is specifically for the Asus Commando motherboard series...

Price: £19.05 exc VAT
(£22.38 Including VAT at 17.5%)

EK Mosfet Asus3
Ref: 507

The ASUS 3 mosfet water block supports the following motherboards:

• P5K
• P5W
• A8N
• A8N 32
• P5B
• P5K3
• 5N32
• Commando
• Striker.

EK FC86 - Acetal Top **REDUCED TO CLEAR**
Ref: 24

High performance VGA water block for GeForce 8600 series graphic cards. Base is made of electrolytic copper. Top is made of quality POM Acetal. The sealing is preformed by quality rubber washer. Block is mounted with enclosed M2 and M2,5 screws.
Fittings are included in price!

Price: £34.75 exc VAT
(£40.83 Including VAT at 17.5%)

EK FCR600 - X-Fire Prep'd, Fluo Red Top
Ref: 148

High performance water block for Radeon HD2900 XT graphic card. The best water block available for HD2900 XT graphic card.

Base is made of electrolytic copper. Top is made of quality reddish fluorescent acrylic glass. The sealing is preformed by quality rubber washer, o-ring. Aluminium part is made for cooling the mosfets and back RAM's. Block is mounted with enclosed M3 screws. Fittings are included in price!

Threads: 4 x G1/4


Price: £51.49 exc VAT
(£60.50 Including VAT at 17.5%)

Single PCI-Slot Backplate for 8800 Series Cards
Ref: 52

Replace the 8800GTX or 8800GTS Double Slot PCI bracket with a Single Slot PCI bracket. This will allow the use of any additional slots on either side of the video card.

Price: £2.99 exc VAT
(£3.51 Including VAT at 17.5%)

EK FCX1900 for X1800/1900 - XFire Prep'd, Acetal Top **CLEARANCE**
Ref: 104

High performance VGA water block for Ati Radeon X1800 and X1900 series graphic cards (not for all in wonder series). Base is made of electrolytic copper. Top is made of quality acrylic glass. The sealing is preformed by quality rubber washer. Aluminium part is made for cooling the power regulatros.
Block is mounted with M3 and M2,5 screws.

The block fits on X1900 XTX!

Fittings are included in price!

Prepared for crossfire means, that fittings can be used on both side of the block (up and down)!


» Installation Guide
(Opens in New Window)

Price: £33.00 exc VAT
(£38.78 Including VAT at 17.5%)

EK FCX1900 Additional MasterCard Chip Cooler
Ref: 74

Additional Cooler for MasterCard chip for FCX1900 - use in partnership with FCX1900 illustrated.

Price: £6.99 exc VAT
(£8.21 Including VAT at 17.5%)

EK Multi-Option Res150 Rev2
Ref: 555

**WITH NEW REVISED BASE TO REDUCE WHIRLPOOL**

High quality multioption EK multi option compensating reservoir for most advanced users!
Manufactured of first class quality acrylic tube and POM Acetal.
Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.
Optional top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.
The compensating reservoir is very easy to fill and is sealed with high quality rubber washer.
Enclosed 2 fittings/barbs, and 1 or 2 plugs, depending on selected option!

Technical data:
170ml capacity
Installation height: 170mm
Diameter: 50mm
One reservoir holder enclosed. Weight: 200g

Price: £20.42 exc VAT
(£23.99 Including VAT at 17.5%)

EK Multi-Option Res250 Rev2
Ref: 556

**WITH NEW REVISED BASE TO REDUCE WHIRLPOOL**

High quality multioption EK multi option compensating reservoir for most advanced users!
Manufactured of first class quality acrylic tube and POM Acetal.
Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.
Optional top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.
The compensating reservoir is very easy to fill and is sealed with high quality rubber washer.
Enclosed 2 fittings/barbs, and 1 or 2 plugs, depending on selected option!

Technical data:
170ml capacity
Installation height: 250mm
Diameter: 50mm
One reservoir holder enclosed. Weight: 250g

Price: £22.12 exc VAT
(£25.99 Including VAT at 17.5%)

EK Multi-Option Res400 Rev2
Ref: 174

**WITH NEW REVISED BASE TO REDUCE WHIRLPOOL**

High quality multioption EK multi option compensating reservoir for most advanced users!
Manufactured of first class quality acrylic tube and POM Acetal.
Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.
Optional top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.
The compensating reservoir is very easy to fill and is sealed with high quality rubber washer.
Enclosed 2 fittings/barbs, and 1 or 2 plugs, depending on selected option!

Technical data:
500ml capacity
Installation height: 400mm
Diameter: 50mm
2 reservoir holder enclosed. Weight: 400g

Price: £24.49 exc VAT
(£28.78 Including VAT at 17.5%)

EK AntiCyclone plate
Ref: 508

Plate for the EK Multi-Option series reservoirs to reduce/elliminate whirlpool effect.

Price: £2.30 exc VAT
(£2.70 Including VAT at 17.5%)