Mountain Mods

Notice:
Ref: 346

PREORDER cases usually reach the customer within 3 weeks of the date of ordering.

O-CuK are also a UK Trade Supplier for MountainMods Cases, so if you want to stock them, just drop us a line

If you'd like any other MountainMods Case not shown here, just fire an e-mail over to stating the case you desire.

For reviews of the MountainMods case range, see HERE

Mountain Mods Installation/Assembly Guide

Guide to MountainMods Panel Options:

• 1) Original Panels
• 2) 3 Big Window Panels
• 3) Solid Panels

Mountain Mods U2-UFO Duality - Black Powder Coat - In Stock
Ref: 549

The Duality series of the U2-UFO offers you the ability to house TWO FULL ATX motherboards in a single case. The left side uses the standard ATX positioning while the right allows for another ATX motherboard in an inverted position. Four power supply ports are available for the heaviest of loads. Six 120mm intake blow holes are aligned for the use of TWO Thermochill 1203 radiators. Making this case capable of cooling two seriously hot systems. This version of the U2-UFO series is great for users that have a need for two systems.

"If I accept the sunshine and warmth, then I must also accept the thunder and lightning." - Mountain Mods U2-UFO DUALITY

NOTE: MountainMods cases do not include 5.25" blanking panels, fans, fangrills, or PCI Slot blanking plates.

» U2UFO Duality Original Top Sketchup Component

» More Info
(Opens in New Window)

Price: £238.00 exc VAT
(£279.65 Including VAT at 17.5%)

Mountain Mods U2-UFO - Powder Coat PA120.3 Model - PREORDER
Ref: 164


PA120.3 Model - Front 120mm fans spaced to match PA120.3 radiators

The Ultimate in Computer Chassis - Mountain Mods award winning U2-UFO. Whether you are cooling with air, water, or phase changing solutions this is the case that can do it all. The U2-UFO is fabricated by skilled workers in the USA. It is made from thick aluminum making it lightweight, sturdy, and thermally friendly. This case includes a caster kit. Discover space in a U2-UFO.

LED Fans etc are all available as standard from the lighted fans section of the Online Store

• Material - Aluminum 5052
• Thickness - 1.65mm-3.25mm
• Dimensions - 18x18x18 inches
• Finish - PowderCoat
• HD Bay - Removable
• Hard Drives - Holds 9
• 5.25 Bay Removable
• 5.25 Devices - Holds 5
• MB Tray Removable
• Form Factors ATX/mATX
• Fan Mounts - 9x120mm - 4 on front, 2 on top, 3 on back
• Empty Weight - 15 lbs.

Mountain Mods Ascension Standard- Brushed Aluminium -Pre Order
Ref: 197

The Mountain Mods Ascension adds 6 inches of height to the already massive U2-UFO platform. The behemoth stands 24 inches tall and is 18 inches deep and wide. The standard configuration allows for one motherboard tray in a vertical position on the left side of the case. On the lower front 6 x 120mm intake fans are positioned for two world renowned Thermochill PA 120.3 radiators. On the back wall another PA 120.3 radiator can be mounted on the right side chamber, while a lone 120mm exhaust above the MB tray has enough space to mount any single 120mm radiator including the Thermochill PA 160. Also on the back wall are 2 Power Supply ports - one on the lower right and one way up in the right corner above the MB tray and 120mm exhaust port. Not watercooling? No problem - each of these 120mm intakes and exhaust ports can be used in conjunction with our 120mm Hard drive brackets. Each hard drive bracket is capable of holding 3 x HDD's. This would allow for the use of 30 Hard drives by using the 120mm ports alone. As if this wasn't enough - the standard Mountain Mods Ascension can hold up to 10 x 5.25 devices. Using our triple bay 120mm fan mounts could get one up to 38 hard drives for the most massive of servers at a moderate cost. The Ascension like the U2-UFO is COMPLETELY MODULAR - or "HYPER MODULAR" as we call it. The front and back panels can rotate 180 degrees for a different configuration. Or easily change your configuration by purchasing individual panels. The Ascension is fabricated by skilled workers in the USA. It is made from thick aluminum making it lightweight, sturdy, and thermally friendly. Casters are included for easy mobility.

Image shows black case but this one is for the brushed aluminium

» More Info
(Opens in New Window)

Price: £269.00 exc VAT
(£316.08 Including VAT at 17.5%)

Mountain Mods Ascension Standard- Black Powder Coat -Pre Order
Ref: 181

The Mountain Mods Ascension adds 6 inches of height to the already massive U2-UFO platform. The behemoth stands 24 inches tall and is 18 inches deep and wide. The standard configuration allows for one motherboard tray in a vertical position on the left side of the case. On the lower front 6 x 120mm intake fans are positioned for two world renowned Thermochill PA 120.3 radiators. On the back wall another PA 120.3 radiator can be mounted on the right side chamber, while a lone 120mm exhaust above the MB tray has enough space to mount any single 120mm radiator including the Thermochill PA 160. Also on the back wall are 2 Power Supply ports - one on the lower right and one way up in the right corner above the MB tray and 120mm exhaust port. Not watercooling? No problem - each of these 120mm intakes and exhaust ports can be used in conjunction with our 120mm Hard drive brackets. Each hard drive bracket is capable of holding 3 x HDD's. This would allow for the use of 30 Hard drives by using the 120mm ports alone. As if this wasn't enough - the standard Mountain Mods Ascension can hold up to 10 x 5.25 devices. Using our triple bay 120mm fan mounts could get one up to 38 hard drives for the most massive of servers at a moderate cost. The Ascension like the U2-UFO is COMPLETELY MODULAR - or "HYPER MODULAR" as we call it. The front and back panels can rotate 180 degrees for a different configuration. Or easily change your configuration by purchasing individual panels. The Ascension is fabricated by skilled workers in the USA. It is made from thick aluminum making it lightweight, sturdy, and thermally friendly. Casters are included for easy mobility.

AVAILABLE IN BLACK OR WHITE (please state which colour in special instructions on order form.)

» More Info
(Opens in New Window)

Price: £294.00 exc VAT
(£345.45 Including VAT at 17.5%)

Mountain Mods U2-UFO Horizon - Black Powder Coat - PREORDER
Ref: 144

The Horizon series of the U2-UFO offers a horizontal positioning of the motherboard. The Motherboard sits above the other components allowing it to be seen in all it's glory from the top panel. Two 3x5.25 bays allow for the use of up to six 5.25 devices. A brace is integrated into the design to support the motherboard in it's horizontal position.

Pic shows Clear Acrylic Panels option...

NOTE: MountainMods cases do not include 5.25" blanking panels, fans, fangrills, or PCI Slot blanking plates.

» More Info
(Opens in New Window)

Price: £238.00 exc VAT
(£279.65 Including VAT at 17.5%)

Mountain Mods Ascension Duality- Brushed Aluminium -Pre Order
Ref: 194

ASCEND to new heights with a Mountain Mods Ascension aluminum computer case!

The Mountain Mods Ascension adds 6 inches of height to the already massive U2-UFO platform. The behemoth stands 24 inches tall and is 18 inches deep and wide. The Duality configuration allows for two motherboard trays in a vertical position in the case. On the lower front 6 x 120mm intake fans are positioned for two world renowned Thermochill PA 120.3 radiators. On the back wall another PA 120.3 radiator can be mounted above the motherboard tray. Also on the back wall are 4 Power Supply ports - two in the lower center and two way up in the right and left corners the MB trays. Not watercooling? No problem - each of these 120mm intakes and exhaust ports can be used in conjunction with our 120mm Hard drive brackets. Each hard drive bracket is capable of holding 3 x HDD's. This would allow for the use of 27 Hard drives by using the 120mm ports alone. As if this wasn't enough - the Duality Mountain Mods Ascension can hold up to 10 x 5.25 devices. Using our triple bay 120mm fan mounts could get one up to 33 hard drives for the most massive of servers at a moderate cost. The Ascension like the U2-UFO is COMPLETELY MODULAR - or "HYPER MODULAR" as we call it. The front and back panels can rotate 180 degrees for a different configuration. Or easily change your configuration by purchasing individual panels. The Ascension is fabricated by skilled workers in the USA. It is made from thick aluminum making it lightweight, sturdy, and thermally friendly. Casters are included for easy mobility.

Image shows black case but this one is for the brushed aluminium

» More Info
(Opens in New Window)

Price: £284.00 exc VAT
(£333.70 Including VAT at 17.5%)

Mountain Mods Ascension Duality- Black Powder Coat -Pre Order
Ref: 187

ASCEND to new heights with a Mountain Mods Ascension aluminum computer case!

The Mountain Mods Ascension adds 6 inches of height to the already massive U2-UFO platform. The behemoth stands 24 inches tall and is 18 inches deep and wide. The Duality configuration allows for two motherboard trays in a vertical position in the case. On the lower front 6 x 120mm intake fans are positioned for two world renowned Thermochill PA 120.3 radiators. On the back wall another PA 120.3 radiator can be mounted above the motherboard tray. Also on the back wall are 4 Power Supply ports - two in the lower center and two way up in the right and left corners the MB trays. Not watercooling? No problem - each of these 120mm intakes and exhaust ports can be used in conjunction with our 120mm Hard drive brackets. Each hard drive bracket is capable of holding 3 x HDD's. This would allow for the use of 27 Hard drives by using the 120mm ports alone. As if this wasn't enough - the Duality Mountain Mods Ascension can hold up to 10 x 5.25 devices. Using our triple bay 120mm fan mounts could get one up to 33 hard drives for the most massive of servers at a moderate cost. The Ascension like the U2-UFO is COMPLETELY MODULAR - or "HYPER MODULAR" as we call it. The front and back panels can rotate 180 degrees for a different configuration. Or easily change your configuration by purchasing individual panels. The Ascension is fabricated by skilled workers in the USA. It is made from thick aluminum making it lightweight, sturdy, and thermally friendly. Casters are included for easy mobility.

AVAILABLE IN BLACK OR WHITE (please state which colour in special instructions on order form.)

» More Info
(Opens in New Window)

Price: £308.00 exc VAT
(£361.90 Including VAT at 17.5%)

Mountain Mods H2gO - PREORDER
Ref: 454

The H2gO was designed for the enthusiast on the go. Measuring up to 17 inches deep, 13.5 inches tall and 12.75 inches wide, makes this case highly portable without sacrificing in the cooling or technology departments. The case is like all Mountain Mod cases broken into 2 separate chambers. The Top chamber houses a full ATX (or smaller mATX) motherboard and no other heated components. This allows for an awesome view through the top and side window of the case. The 2 x 120mm intake fans blow in symmetry with the back 2 x120mm fans for full AIR chamber effect. If air just is not enough for you then purchase a Thermochill PA 120.2 and attach it internally on the front of the unit (other manufacturer radiators can work as well by attaching one fan to chassis only and the other to radiator then chassis). If one Thermochill PA 120.2 is not enough purchase yet another and attach it to the back of the unit, externally and route your tubes through the lasered out holes in the chassis for up to 7/8 inch OD tubing. Still if that is not enough 2 more 120mm blow holes exist on the bottom chamber and are quite capable of holding a Thermochill PA 120.1, PA 160, or any other single radiator.

NOTE: MountainMods cases do not include 5.25" blanking panels, fans, fangrills, or PCI Slot blanking plates.

» H2G0 Sketchup Component

» More Info
(Opens in New Window)

Price: £129.00 exc VAT
(£151.58 Including VAT at 17.5%)

Mountain Mods U2-UFO - Brushed Ali PA120.3 Model - PREORDER
Ref: 303

The Ultimate in Computer Chassis - Mountain Mods award winning U2-UFO. Whether you are cooling with air, water, or phase changing solutions this is the case that can do it all. The U2-UFO is fabricated by skilled workers in the USA. It is made from thick aluminum making it lightweight, sturdy, and thermally friendly. This case includes a caster kit. Discover space in a U2-UFO.

LED Fans etc are all available as standard from the lighted fans section of the Online Store

• Material - Aluminum 5052
• Thickness - 1.65mm-3.25mm
• Dimensions - 18x18x18 inches
• Finish - Brushed
• HD Bay - Removable
• Hard Drives - Holds 9
• 5.25 Bay Removable
• 5.25 Devices - Holds 5
• MB Tray Removable
• Form Factors ATX/mATX
• Fan Mounts - 7x120mm - 4 on front, 3 on back
• Empty Weight - 15 lbs.

Mountain Mods U2-UFO OPTI1203 - Black Powder Coat - PREORDER
Ref: 380

The Ultimate in Computer Chassis - Mountain Mods award winning U2-UFO.
The Ultimate Computer Chassis with yet more options. The U2-UFO Opti-1203 meets the demand for users with more 5.25 devices and or less system fans. This case holds up to a whopping 10 - 5.25 devices and maintains superb airflow and adequate space for mods or water cooling. Triple 120mm intake fans align with the Thermochill HE 1203 radiator. Two Power Supply ports allow for use of dual or redundant power supplies for the heaviest of loads. An acrylic plate covers the optional port. The U2-UFO is fabricated by skilled workers in the USA. It is made from thick aluminum making it lightweight, sturdy, and thermally friendly. Casters are included for easy mobility.
Discover space in a U2-UFO.

• Material - Aluminum 5052
• Thickness - 1.65mm-3.25mm
• Dimensions - 18x18x18 inches
• Finish - Black Powder Coat
• Power Supplies - Holds up to 2
• HD Bay - Removable Holds 9
• 5.25 Bay - 2 Removable
• 5.25 Devices - Holds 10
• MB Tray - Removable
• Form Factors - mATX/ATX/EATX
• Fan Mounts - 6-120mm - 3 on front, 3 on back
• Empty Weight - 15 lbs.

Mountain Mods U2-UFO OPTI1203 - Brushed Ali - PREORDER
Ref: 283

The Ultimate in Computer Chassis - Mountain Mods award winning U2-UFO.
The Ultimate Computer Chassis with yet more options. The U2-UFO Opti-1203 meets the demand for users with more 5.25 devices and or less system fans. This case holds up to a whopping 10 - 5.25 devices and maintains superb airflow and adequate space for mods or water cooling. Triple 120mm intake fans align with the Thermochill HE 1203 radiator. Two Power Supply ports allow for use of dual or redundant power supplies for the heaviest of loads. An acrylic plate covers the optional port. The U2-UFO is fabricated by skilled workers in the USA. It is made from thick aluminum making it lightweight, sturdy, and thermally friendly. Casters are included for easy mobility.
Discover space in a U2-UFO.

• Material - Aluminum 5052
• Thickness - 1.65mm-3.25mm
• Dimensions - 18x18x18 inches
• Finish - Black Powder Coat
• Power Supplies - Holds up to 2
• HD Bay - Removable Holds 9
• 5.25 Bay - 2 Removable
• 5.25 Devices - Holds 10
• MB Tray - Removable
• Form Factors - mATX/ATX/EATX
• Fan Mounts - 6-120mm - 3 on front, 3 on back
• Empty Weight - 15 lbs.

Mountain Mods Twice7 - Powder Coat - 3 Big Window - PREORDER
Ref: 219

Mountain Mods Twice7 aluminum cube incorporates a dual chamber design. The left side houses the MB while the right side houses the drives and a full size PSU. It maintains significant airflow to keep even overclocked systems cool. 3 large acrylic windows let you see inside from any angle. The small size and light weight make this an ideal box to take to LANs, use as an HTPC, or place on a desk. Even though it is small it still allows for the use of EATX MBs with an optional tray

• Material: Aluminum 5052
• Thickness: 1.65mm-3.25mm
• Dimensions: 14x14x14 inches
• Finish: Powder Coat
• HD Bay: Removable
• Hard Drives: Holds 5
• 5.25 Bay: Removable
• 5.25 Devices: Holds 3
• MB Tray: Removable
• Form Factors: mATX/ATX/EATX
• Fan Mounts: 3-120mm,2-80mm
• Empty Weight: 10.5 lbs.

Mountain Mods Bobslay - PREORDER
Ref: 160

Mountain Mods "Bob Slay" brings innovation, mobility, functionality and form to the masses. The Bob Slay is made in the USA entirely from laser precision cut 1/4 inch cast acrylic including the I/O Panel. The Bob Slay is sleek, measuring 14.59 x 11.11 x 12.21 inches (L x W x H) while still allowing the consumer to use a full ATX PSU, 2 x 5.25 devices, up to 3 hard drives and a full ATX form factor Motherboard. Many other smaller cases require the consumer to sacrifice cutting edge technology and step down to Micro ATX form factors and smaller PSU's. The Bob Slay is designed for the individual that understands that success demands the use of the latest and greatest hardware. The Bob Slay is loaded with unique features. The case is separated into two compartments. The bottom portion holds the drives and PSU while the Motherboard sits alone on the top giving an unobstructed view of all its' goodness. The Motherboard is also turned at a 90 degree angle. The I/O panel (which usually sits at the back of a chassis) is on the right of the case. This configuration allows for unhindered access to cable connections and ports. This is a great application for those that attend LANS. The turning of the board also places the CPU and memory channels in the direct path of the 120mm intake fan giving optimum cooling for ATX systems with minimal fans. The Bob Slay accommodates a single 120mm intake and exhaust. Other features that elevate the Bob Slay include Nickel Plated antivandal power/reset switches, blue LED's with chrome bezels, and a stainless steel handle for portability. In a gamers world of slay or be slain one must sacrifice nothing. Become a slayer - "Bob Slay"

Specifications:

• Material: .25 inch Cast Acrylic
• 5.25 devices: Up to 2
• Hard drives: Up to 3 (with purchase of acrylic HD bracket)
• PSU size: Full ATX
• Form Factor: ATX/mATX
• Fans: 2 x 120mm
• Empty Case Weight: 10.5 lbs.

Mountain Mods Side Panels - 3x Panels for U2 UFO series
Ref: 725

**IN STOCK NOW!**

For current revision U2-UFO Cases, or converting U-Wrapper cases to current standard (ie: 3x separate panels instead of 1-piece U lid)



Price: £54.00 exc VAT
(£63.45 Including VAT at 17.5%)

Mountain Mods Side Panels - 3x Acrylic Panels for U2 UFO series
Ref: 39

**IN STOCK NOW!**

For current revision U2-UFO Cases, or converting U-Wrapper cases to current standard (ie: 3x separate panels instead of 1-piece U lid)



Price: £46.00 exc VAT
(£54.05 Including VAT at 17.5%)

Mountain Mods Side Panels - Single Panel for U2 UFO series
Ref: 670

**IN STOCK NOW!**

For current revision U2-UFO Cases, or converting U-Wrapper cases to current standard (ie: 3x separate panels instead of 1-piece U lid)



Price: £19.99 exc VAT
(£23.49 Including VAT at 17.5%)

Mountain Mods 5.25" Bay - Ali Original
Ref: 341

**IN STOCK NOW!**

Price: £37.00 exc VAT
(£43.48 Including VAT at 17.5%)

Mountain Mods 5.25" Bay - Black Powder Coat
Ref: 312

**IN STOCK NOW!**

Price: £37.00 exc VAT
(£43.48 Including VAT at 17.5%)

Mountain Mods Acrylic Feet
Ref: 551

**PREORDER - ETA, approx 4 weeks**

Acrylic feet for use with U2-UFO based chassis'.

Mountain Mods Motherboard Trays
Ref: 550

**PREORDER - ETA, approx 4 weeks**

Motherboard trays for MountainMods cases, or for DIY case assemblies - do not include PCI Blanking Plates / Thumbscrews.

Mountain Mods 5.25" Blanking Plate - Black Acrylic
Ref: 93

**IN STOCK NOW!**

Do you have empty 5.25 bays that are uncovered? Pick up a Mountain Mods clear acrylic 5.25 bay cover to fill it in. Made with 1/8th inch black acrylic and cut with laser precision these covers fit great in any Mountain Mods or standard computer case. Color and gloss match our black powder coated cases.

Mountain Mods 5.25" Blanking Plate - Clear Acrylic
Ref: 170

**IN STOCK NOW!**

Do you have empty 5.25 bays that are uncovered? Pick up a Mountain Mods clear acrylic 5.25 bay cover to fill it in. Made with 1/8th inch black acrylic and cut with laser precision these covers fit great in any Mountain Mods or standard computer case.

Mountain Mods 5.25" Blanking Plate - PowderCoat
Ref: 548



Do you have empty 5.25 bays that are uncovered? Pick up a Mountain Mods 5.25 bay cover to fill it in.

Mountain Mods PSU Blanking Plate - Clear Acrylic
Ref: 497

Clear Acrylic plate predilled to block off excess PSU mounting holes in Mountain Mods cases.

Price: £3.99 exc VAT
(£4.69 Including VAT at 17.5%)

Mountain Mods 120mm blowhole / fan HDD Rack - Black PowderCoat
Ref: 267

These 2 brackets attach to a 120mm fan or blowhole to allow 3x 3.5" HDDs to be mounted directly behind the aforementioned fan or blowhole.

Price: £7.99 exc VAT
(£9.39 Including VAT at 17.5%)