Store Menu

New Products

WaterCooled Cases

Online Catalogue »  Water Cooling »  WaterCooled Cases

Don't see the case you want here??

Don't see the case you want here??
Ref: 453

We will fit watercooling into any case listed on our Online Store in the Cases Section - the standard charge is £45 on top of the cost of the case and watercooling parts. Simply to discuss further...

NOTE: Thermal Capacities quoted in product descriptions below are all based on an avg flowrate of ~6 litres per minute, maintaining a coolant temperature of ambient + 10 degrees C.





ThermoChill H2G0 Watercooled Case
Ref: 483

Watercooling Kit n' Case Bundle:

  • Mountain Mods H2GO Aluminium Case
  • ThermoChill PA120.2 Radiator
  • Choice of D5 Vario or DDC Ultra Pumps
  • DangerDen HDPE Bay Reservoir
  • Your choice of Tubing...
  • 4x YateLoon or Nexus Fans
  • 4 day leadtime
  • All Copper Loop - No additives required


Simply add your choice of CPU and GPU Blocks....!

Please note, if you require a similar kit prefitting into any other case, drop us a line and we'll see what we can do...

» For Further Detail see Here
(Opens in New Window)

Price: £234.00 exc VAT
(£274.95 Including VAT at 17.5%)


Choose Color

Choose Fans

Choose Tubing Internal Diameter - Doesn't affect price

Choose Pump - Doesn't affect price


Primary CPU Block << Opens Waterblocks page in New Window (inc pair of hoseclips & Y Splitter if RBX

Choose GPU Block (inc pair of hoseclips)

Add second GPU Block for SLI Machines?

Choose NB Chipset Block (inc pair of hoseclips)

Choose SB Chipset Block (inc pair of hoseclips)

Choose Mosfet Block (inc pair of hoseclips)

Choose 2nd Mosfet Block if req'd (inc pair of hoseclips)

Tick here to swap Reservoir for a Fillport & T-piece mounted on the case roof.

Add 2nd PA120.2 for rear mounting - (roughly doubles the total thermal capacity) - (+£42.50)




Related products:
1. Distilled Water (Ref: 72)
2. FluidXP+ EXT (32oz) (Ref: 426)




ThermoChill WaterBox Watercooled Case
Ref: 487

Watercooling Kit n' Case Bundle:

  • Danger Den Waterbox+ (ThermoChill Edition)
  • ThermoChill PA120.2 Radiator
  • Choice of D5 Vario or DDC Ultra Pumps
  • Bay Reservoir
  • 7/16" Masterkleer Tubing
  • 4x YateLoon or Nexus Fans
  • Novus Acrylic Cleaning Kit
  • All Copper Loop - No additives required


Simply add your choice of CPU and GPU Blocks....!

Please note, if you require a similar kit prefitting into any other case, drop us a line and we'll see what we can do...

» For Further Detail see Here
(Opens in New Window)

Price: £220.00 exc VAT
(£258.50 Including VAT at 17.5%)



Choose Fans

Choose Pump


Primary CPU Block << Opens Waterblocks page in New Window (inc pair of hoseclips & Y Splitter if RBX

Choose GPU Block (inc pair of hoseclips)

Add second GPU Block for SLI Machines?

Choose NB Chipset Block (inc pair of hoseclips)

Choose SB Chipset Block (inc pair of hoseclips)

Choose Mosfet Block (inc pair of hoseclips)

Choose 2nd Mosfet Block if req'd (inc pair of hoseclips)

Tick here to swap Reservoir for a Fillport & T-piece mounted on the case roof.




Related products:
1. Distilled Water (Ref: 72)
2. FluidXP+ EXT (32oz) (Ref: 426)




ThermoChill V2K-Pro Watercooled Case
Ref: 619

Complete Pre-Watercooled Case comprising of:

  • LianLi v2000plusII Aluminium Chassis
  • ThermoChill PA120.3 Radiator
  • DangerDen Bay Reservoir
  • Your choice of pump...
  • Your choice of tubing size...
  • Your choice of fans (determines heat capacity of radiator)...
  • 2x Nexus fans to replace standard case fans
  • 4 day leadtime
  • All Copper Loop - No additives required


NB: PSU Not Included.

This case is prefitted with the cream of watercooling - the PA120.3 offers the highest thermal capacity for the lowest noise out of all the triple-fan radiators on the market to date... this makes for unbeatable performance at very low noise levels.

Despite being prefitted with watercooling, the following drive bays are still fully available for use....

  • 5x 3.5" in Lower Section
  • 1x 3.5" in Upper Section
  • 5x 5.25" in Upper Section


Simply select your preference of parts from the options below....!

Please note, if you require a similar kit prefitting into any other case, drop us a line and we'll see what we can do...

» For Further Detail see Here
(Opens in New Window)

Price: £259.00 exc VAT
(£304.33 Including VAT at 17.5%)


Choose Color - Doesn't affect price

Choose Fans - Doesn't affect price

Choose Tubing Internal Diameter - Doesn't affect price

Choose Pump


Primary CPU Block << Opens Waterblocks page in New Window (inc pair of hoseclips & Y Splitter if RBX

Choose GPU Block (inc pair of hoseclips)

Add second GPU Block for SLI Machines?

Choose NB Chipset Block (inc pair of hoseclips)

Choose SB Chipset Block (inc pair of hoseclips)

Choose Mosfet Block (inc pair of hoseclips)

Choose 2nd Mosfet Block if req'd (inc pair of hoseclips)

Tick here to swap Reservoir for a Fillport & T-piece mounted on the case roof.




Related products:
1. Distilled Water (Ref: 72)
2. FluidXP+ EXT (32oz) (Ref: 426)




ThermoChill V2K Watercooled Case
Ref: 478

Complete Pre-Watercooled Case comprising of:

  • LianLi v2000plusII Aluminium Chassis
  • ThermoChill PA160 Radiator
  • DDC Ultra (if chosen from dropdown below)
  • DangerDen Bay Reservoir
  • 7/16" Masterkleer Tubing
  • Front fan replaced with Nexus 120mm fan. Rear fan 7v'd.
  • 4 day leadtime
  • All Copper Loop - No additives required


NB: PSU Not Included.

This case is prefitted with the cream of watercooling. The LaingDDC Ultra pump (with Alphacool top) has gathered a reputation for being the most powerful DC pump on the market, whilst having the added benefit of being VERY quiet. Partnered with the PA160 this makes for ultimate cooling power at very low noise levels.

Despite being prefitted with watercooling, the following drive bays are still fully available for use....

  • 5x 3.5" in Lower Section
  • 1x 3.5" in Upper Section
  • 5x 5.25" in Upper Section


Simply add your choice of CPU and GPU Blocks....!

Please note, if you require a similar kit prefitting into any other case, drop us a line and we'll see what we can do...

» For Further Detail see Here
(Opens in New Window)

Price: £245.00 exc VAT
(£287.88 Including VAT at 17.5%)


Choose Color

Choose Pump


Primary CPU Block << Opens Waterblocks page in New Window (inc pair of hoseclips & Y Splitter if RBX

Choose GPU Block (inc pair of hoseclips)

Add second GPU Block for SLI Machines?

Choose NB Chipset Block (inc pair of hoseclips)

Choose SB Chipset Block (inc pair of hoseclips)

Choose Mosfet Block (inc pair of hoseclips)

Choose 2nd Mosfet Block if req'd (inc pair of hoseclips)

Tick here to swap Reservoir for a Fillport & T-piece mounted on the case roof.




Related products:
1. Distilled Water (Ref: 72)
2. FluidXP+ EXT (32oz) (Ref: 426)



© Over-Clock UK Ltd 2007. Note: Not all items are held in stock. Some items are brought in to order. E&OE. Prices are subject to change without notice.
Actinic v8.5 skin by M A Coyles. This site conforms to Section508 Guidelines.

Search
 

Cart Contents
Items Ordered:
Cart Value:
View Cart   Checkout